Novatsar VX600 is NovaStar’s new all-in-one controller that integrates video processing and video control into one box. It features 6 Ethernet ports and supports video controller, fiber converter and Bypass working modes. A VX600 unit can drive up to 3.9 million pixels, with the maximum output width and height up to 10,240 pixels and 8192 pixels respectively, which is ideal for ultra-wide and ultra-high LED screens.
Novatsar VX600 is capable of receiving a variety of video signals and processing high-resolution images. In addition, the device features stepless output scaling, low latency, pixel-level brightness and chroma calibration and more, to present you with an excellent image display experience.
What’s more, the VX600 can work with NovaStar’s supreme software NovaLCT and V-Can to greatly facilitate your infield operations and control, such as screen configuration, Ethernet port backup settings, layer management, preset management and firmware update.
VX600 Novastar LED Screen vx600 All-in-one Video Controller sone Features：
Input connectors
− 1x HDMI 1.3 (IN & LOOP)
− 1x HDMI 1.3
− 1x DVI (IN & LOOP)
− 1x 3G-SDI (IN & LOOP)
− 1x 10G optical fiber port (OPT1)
Output connectors
− 6x Gigabit Ethernet ports
A single device unit drives up to 3.9 million pixels, with a maximum width of 10,240 pixels and a maximum height of 8192 pixels.
− 2x Fiber outputs
OPT 1 copies the output on 6 Ethernet ports.
OPT 2 copies or backs up the output on 6 Ethernet ports.
− 1x HDMI 1.3
For monitoring or video output
·Self-adaptive OPT 1 for either video input or sending card output Thanks to the self-adaptive design, OPT 1 can be used as either an input or output connector, depending on its connected device.
Audio input and output
− Audio input accompanied with HDMI input source
− Audio output via a multifunction card
− Output volume adjustment supported
Note: If you want to know more features, click the link to download and view:
VX600-Novastar-LED-Screen-vx600-All-in-one-Video-Controller-Specification
Appearance:
|
No.
|
Area
|
Function
|
| 1 |
LCD screen
|
Display the device status, menus, submenus and messages.
|
| 2 |
Knob
|
1):Rotate the knob to select a menu item or adjust the parameter value.
2):Press the knob to confirm the setting or operation.
|
| 3 |
ESC button
|
Exit the current menu or cancel an operation. |
| 4 |
Control area
|
1):Open or close a layer (main layer and PIP layers), and show the layer status.
Status LEDs:
− On (blue): The layer is opened.
− Flashing (blue): The layer is being edited.
− On (white): The layer is closed.
2):SCALE: A shortcut button for the full screen function. Press the button to make the layer of the lowest priority fill the entire screen.
Status LEDs:
− On (blue): Full screen scaling is turned on.
− On (white): Full screen scaling is turned off.
|
| 5 |
Input source
buttons
|
Show the input source status and switch the layer input source.
Status LEDs:
–On (blue): An input source is accessed.
–Flashing (blue): The input source is not accessed but used by the layer.
–On (white): The input source is not accessed or the input source is abnormal.
|
| 6 |
Shortcut function
buttons
|
1):PRESET: Access the preset settings menu.
2):TEST: Access the test pattern menu.
3):Freeze: Freeze the output image.
4):FN: A customizable button
|
English (United States) 
English (UK) 
Spanish (Spain) 
Spanish (Mexico) 
Portuguese (Portugal) 
Portuguese (Brazil) 
French (Canada) 
French (France) 
German 
Russian 
Arabic 
Danish 
Korean 
Japanese 
Dutch 
Czech 
Swedish 
Georgian 
Hungarian 
Italian 
Croatian 
Romanian 
Serbian 
Slovak